Paper para la creación de la camara de electroforesis casera

Build a Gel Electrophoresis Chamber 

Step- by- step instructions for building gel electrophoresis chamber using inexpensive materials that are easily obtained from local hardware and electronics stores

. 

   TABLE OF CONTENTS 

Materials 

1. Plexiglas® and Tefl on®

   To fi nd a supplier, look in the Yellow Pages of your local telephone directory under the heading “Plastics - Rods, Tubes, Sheets, Etc.”. Have them cut the pieces of Plexiglas® and Tefl on® to size and the slots in the Gel Carrier Sides (see step 2 under “Construct the Gel Carrier”). The distributor will also be able to provide the Tefl on for the Gel Comb.  2 pieces: 3¾˝ by ½˝ by ½˝ thick - for Gel Carrier Sides   1 piece: 3¾˝ by 3¾˝ by ¾˝ thick - for Gel Carrier Base   2 pieces: 7½˝ by 2½˝ by ¼˝ thick - for Chamber Long Sides   2 pieces: 37⁄8˝ by 2½˝ by ¼˝ thick - for Chamber Short Sides   2 pieces: 7½˝ by 5˝ by ¼˝ thick - for Chamber Lid and Chamber Bottom   1 piece: 7½˝ by 1¼˝ by ¼˝ thick - for Chamber Lid Front   6 pieces: ½˝ long pieces of 3⁄8˝ dowel or square rod - for pegs   Tefl on® - 35⁄8˝ by 1˝ by 1⁄16˝ thick - for Gel Comb

Descargar aqui el archivo